The maintenance schedule for your Taylor-Dunn vehicle varies by model. However, there are some common intervals.
After the first 10 to 25 hours of operation, perform the following on your vehicle. Check your Vehicle Operator and Service Manual to determine the correct interval to perform break-in maintenance. Refer to Taylor-Dunn Break-In and Inspection for more information.
- Re-torque wheel nuts.
- Inspect all hardware for tightness.
- Adjust front wheel bearings.
Maintenance Intervals
Reference the charts below to determine the maintenance interval for your vehicle. For maintenance procedures to be performed at each interval, refer to your Vehicle Operator and Service Manual.
Personnel Carriers
BT-280 Maintenance Intervals |
||||
Weekly | Monthly/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,200 hours |
RE-380 and R0-380 Maintenance Intervals |
|||||
Weekly | Monthly/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,000 hours | 2 years/2,000 hours |
Model SS, MX and Curtis DC |
|||
1 month/100 hours | 6 months/500 miles | 1 year/1,000 hours | 2 years/2,000 hours |
Stockchasers
SC-100 24/36/48V and SC-090 Maintenance Intervals |
||||||
1 month/100 hours | 3 months/300 hours | 6 months/600 hour | 1 year/1,200 hours | 2 years/2,400 hours |
SC-100 AC/SC-90 AC Maintenance Intervals |
||||
1 month/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,000 hours | 2 years/2,000 hours |
SC-100 Maintenance Interval |
|||
1 month/100 hours | 6 months/500 hours | 1 year/1,000 hours | 2 years/2,000 hours |
Tow Tractors
C-432 Maintenance Intervals |
||||
Weekly | 3 months/300 hours | 6 months/600 hours | 1 year/1,000 hours | 2 years/2,000 hours |
C-425 DC Maintenance Intervals |
||||
Weekly | 3 months/300 hours | 6 months/600 hours | 1 year/1,200 hours | 2 years/2,000 hours |
C-426 Maintenance Intervals |
|||||
Weekly | 1 month/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,200 hours | 2 years/2,400 hours |
E-451 and E-457 Maintenance Intervals |
|||||
Weekly | 1 month/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,200 hours | 2 years/2,000 hours |
Tiger TC-50E Maintenance Intervals |
||||
Weekly | 1 month/150 hours | 3 months/500 hours | 6 months/1,000 hours | 2 years/12,0000 (19,000 miles/30578 km) |
Tiger Cub TC-30-60 Maintenance Interval |
|||||
Weekly | 1 month/150 hours | 3 months/500 hours | 6 months/1,000 hours | 1 year/2,000 hours | 2 years/2,400 hours |
Tiger TC-30, TC-40, TC-50, TC-60 and Tiger TC-80-120 Maintenance Intervals |
||||
1 month/150 hours | 3 months/500 hours | 6 months/1,000 hours | 1 year/1,200 hours | 2 years/2,400 hours |
TT-316 DC Maintenance Intervals |
||||
1 month/150 hours | 3 months/500 hours | 6 months/1,000 hours | 1 year/2,000 hours | 2 years/2,400 hours |
TT-316 AC Maintenance Intervals |
|||||
Weekly | 1 month/150 hours | 3 months/500 hours | 6 months/1,000 hours | 1 year/1,200 hours | 2 years/2,400 hours |
Utility Vehicles
G-1500 Maintenance Intervals |
|||||
Weekly/25 hours | 100 hours | 200 hours | 600 hours | 1,200 hours | 2,400 hours |
B-150 and MX-1600; Bigfoot 36/48 and Bigfoot XL Maintenance Intervals |
||||
Weekly | 1 month/100 hours | 6 months/500 hours | 1 year/1,000 hours | 2 years/2,000 hours |
B-200 and B-210 Maintenance Intervals |
|||||
Weekly/ 20 hours | 1 month/100 hours | 3 months/300 hours | 6 months/600 hours | 1 year/1,200 hours | 2 years/2,400 hours |
G-100 Maintenance Intervals |
||||||
Weekly | Monthly | 3 months | 6 months | 12 months | 24 months | 60 months |
Most maintenance items should only be performed by a qualified technician. Details regarding the service procedures can be found in the Vehicle Operator and Service Manual.
Any problems found during an inspection should be repaired before the vehicle is put back into service. See your authorized Taylor-Dunn Dealer for repairs. To find a dealer near you, use the Dealer Locator.