Saltar al contenido Saltar a navegación Saltar al pie de página
POLARIS COMMERCIAL
CENTRO DE AYUDA
11/21/2022

Pro XD Plow System Kits

Listed below are the plow mount, frame and blade kits for Polaris Pro XD vehicles. Installation instructions are linked as well, which list the individual parts in each kit. 

To order a replacement part for any aspect of your plow system, take down the part number you wish to purchase and contact your authorized Pro XD Dealer.  

Prior to purchasing, always check the installation instructions to ensure that the kit fits your Pro XD and that you have all of the necessary tools and hardware. 

MOUNTS
Glacier Pro HD Plow Mount (Part Number 2879106)

glacier pro hd plow mount

For more information, view the installation instructions. These instructions also list all of the parts included in the plow mount kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 


FRAMES
Glacier Pro HD Plow Frame (Part Number 2883255) 

Glacier Pro HD plow frame

For more information, view the installation instructions. These instructions also list all of the parts included in the plow frame kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 

In the event of a collision with an obstacle at a speed greater than what the system is rated for, the angle selection T-Pin of the manual angulation mechanism is designed to shear to minimize the force of impact to the pushframe. If the angle selection T-pin is broken, inspect all components of the plow system to see if any other system components have been damaged. If a part is damaged, the impact speed was greater than what the system is designed to support. You must then buy a replacement from your dealer. 

T pin diagram

Should you need to replace the angle selection T-Pin, a spare pin is provided in the angle lever. Follow the steps below to change your T-Pin:

1. Remove the R-Pin (62) and the clevis pin (61) that keep the angle lever (28) in place. 

2. Lift the angle lever and remove the spare T-Pin (31). 

3. Remove the two tension springs (39) retaining the T-Pin.

4. Remove the two pieces of broken T-Pin.

5. Insert the new T-Pin.

6. Replace the angle lever.

7. Reinstall the clevis pin and the R-Pin.

8. Reinstall the two tension springs. 

Important Notes: Visit your authorized Polaris Dealer to order a new T-Pin, part number 2204829, and replace the original spare you just removed in the event of an additional hard impact failure. The T-Pin is designed only to protect against the impacts affecting right and left ends of the blade. The T-Pin does not protect the system from a central impact. Always inspect the entire system in the event of a hard impact to ensure that no damage occurred to any system components other than the T-Pin.


BLADES
Glacier Pro HD Plow Blade - 72-Inch Poly (Part Number 2879317) 

plow blade

For more information, view the installation instructions. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 

Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Curb Finder Kit (part number 2879872) and Hardened Wear Bar Kit (part number 2879875).


Glacier Pro HD Plow Blade - 72-Inch Steel (Part Number 2879874) 

Glacier Pro HD plow blade

For more information, view the installation instructions. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 

Other accessory kits available for purchase are the Plow Markers Kit (part number 2872726), Hardened Wear Bar Kit (part number 2879875) and Rubber Snow Deflector Flap Kit (part number 2858541). To order a kit, see your authorized Pro XD Dealer.


HYDRAULICS
Hydraulics are optional and not required for use of a plow with your Pro XD.

Glacier Pro HD Plow Hydraulic Lift System (Part Number 2883410)

Pro XD hydraulic lift

For more information, view the installation instructions. These instructions also list all of the parts included in the kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 


Glacier Pro HD Plow Hydraulic Angle System (Part Number 2889029)

Glacier Pro HD Hydraulic Angle System

For more information, view the installation instructions. These instructions also list all of the parts included in the kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 

Note: Use of the hydraulic angle system also requires purchase of a Plow System (frame, lift method and blade) and a Plow Controller Kit (part number 2883247). 


Glacier Plow System Power Controller (2883247) 

Plow system power controller

For more information, view the installation instructions. These instructions also list all of the parts included in the kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer. 

View plow accessories for the Pro XD Mid-Size here and the Pro XD Full-Size here
To view the full line-up of Pro XD accessories, see Pro XD Mid-Size here and Pro XD Full-Size here.  
For more information or to order accessories, see your authorized Pro XD Dealer. Find a dealer near you with the Dealer Locator

Unless noted, all trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.

Palabra (s) clave plow , parts , purchase , accessories , install , how to , instructions , find ,